Spiral Steel Pipe

Pipe fitting,Galvanized pipe,3PE pipe
Pile pipe
Pile pipe

Pile pipe

Pipe type:Spiral seam welded steel pipe, Double-sided submerged arc welding steel pipe(DSAW steel pipe), helical submerged arc welded steel pipe,SSAW Pipe, SSAW Steel Pipe, Spiral Steel Pipe, Welded S

Size : OD:219-3500mm WT:1.65-40mm, Length: 6mtr-20mtr

Standard & Grade :ASTM A252 Grades 1,2,3

Ends:Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends

The process of Ssaw steel pipe:

Steel coils→Ray material test → Delivery straightening → Plate cutting and welding  → circle shear edge milling  → Forming  → inside auto-welding  → Outside auto-welding  → Online ultrasonic inspection  → Fixed length cutting  → Visual inspection for outside seam  → Visusl inspection for inside seam  → X-ray inspection for welding seam  → Even end and end bevel  → Hydrostatic test  → Ultrasonic inspection → Final product inspection  → Marking  → Store up

A252 Comparitive Specifications
ASTM Specification A252 describes nominal (average) wall steel pipe piles of cylindrical shape and applies to pipe piles in which the steel cylinder acts as a permanent load-carrying member or as a shell to form case-in-place concrete piles.
Surface imperfections exceeding 25% of the nominal wall in depth are considered defects. Defects not exceeding 22.5% of the nominal wall in depth may be repaired by welding. Before welding, the defect shall be completely removed.

MECHANICAL PROPERTIES – TENSILE REQUIREMENTS


Grade 1

Grade 2

Grade 3

Tensile Strength, min, psi

50,000

60,000

66,000

Yield Strength

30,000

35,000

45,000

CHEMICAL REQUIREMENTS FOR A252


Phosphorus

Seamless and Welded

Max% 0.050


•Testing Requirements for seamless and welded A252 steel piling pipe
oHydrostatic Testing: Not specified.
oMechanical Tests:
Tensile Test: Either longitudinal or transverse at option of manufacturer.
oNumber of Tests: One tensile test per 200 lengths.
•Permissible Variations for A252 steel piling pipe
oWall thickness: Not more than 12.5% under the nominal wall thickness specified.
oWeights per foot: The weight of any individual length of pipe shall not vary more than 15% over or 5% under the weight specified. Each individual length shall be weighed separately.
oOutside diameter: Shall not vary more than plus or minus 1% from the diameter specified.
•Lengths of A252 steel piling pipe
Steel Tubular Products A252 steel piling pipe may be ordered in single or double random lengths or in uniform lengths.

oSingle random – 16’ – 25’ inclusive
oDouble random – Over 25’ with a minimum average of 35’
oUniform – Plus or minus 1” on length specified
•Marking Requirements
Rolled, die-stamped, or paint-stenciled (manufacturer’s option).

oManufacturer’s name, brand, or trademark
oHeat number
oMethod of pipe manufacture
oSize, weight, length
oWall thickness
oASTM A252 and steel grade

Other Types of API 5L / ASTM A252/ EN10219-2/ ASTM A572 Spiral Steel Pipe / SSAW Steel Pipe:

API 5L / ASTM A252/ EN10219-2/ ASTM A572 Spiral Steel Pipe

API 5L / ASTM A252/ EN10219-2/ ASTM A572 SSAW Steel Pipe

spiral welded pipe

ssaw pipe

welded tubes

ssaw pipe supplier

spiral welded steel pipe suppliers

API 5L ssaw pipe suppliers

spiral welded tube

ASTM A252 ssaw pipe manufacturer

pipa spiral welded

API 5L gr.b ssaw pipe suppliers

spiral seam pipe suppliers

API 5L x42 ssaw pipe suppliers

spiral steel tube

API 5L x46 ssaw pipe suppliers

spiral welded stainless steel pipe

API 5L x52 ssaw pipe suppliers

spiral seam welded pipe

API 5L x60 ssaw pipe suppliers

spiral seam pipe

API 5L x65 ssaw pipe supplier

spiral steel pipe

API 5L x70 ssaw pipe supplier

spiral pipe supplier

ssaw pipe manufacturer

spiral welded carbon steel pipe supplier

Ssaw steel pipes

spiral welded steel pipe supplier

ssaw welding steel pipes

spiral welded pipes manufacturer

spiral pipe suppliers

spiral welded pipe suppliers

ssaw pipe in China

DIMENSION TOLERANCES OF SSAW STEEL PIPE

Standard

Standard

SY/T5040-2000

Y/T5037-2000

SY/T9711.1-197

ASTM A252

AWWA C200-9

API 5L PSL1

Tube end OD deviation

± 0.5%D

± 0.5%D

-0.79mm~+2.38

<± 0.1%T

<± 0.1%T

± 1.6mm


Wall thickness


± 10.0%T

D<508mm, ±12.5%T


- 8%T~+19.5%T


<- 12.5%T


-8%T~+19.5%T

5.0mm

D>508mm, ±10.0%T

T≥15.0mm, ±1.5m

SPECIFICATIONS OF SSAW STEEL PIPE

Recommended

Whatsapp

E-mail

Wechat